Tensioned screen panels

Service life ten times longer than wire mesh

Blockages prevented by tapered holes

Resistant to microbes

Screen panels in the KÜPER rubber materials GIGANT & CLEAN are protected against microbes.

Variety provided by 5 types of perforation

Longer service life

Comparing service life for dry processing. With hot-vulcanised rubber screen panels, service life is far longer than with wire ones.

+1100%

RUBBER

100%

WIRE

8%

Cast and hot-vulcanised tensioned screen panels

Steel ropes and a steel transverse reinforcement support the wear material covering them. The ropes absorb the tensile forces in the direction of span.

Stamped rubber screen panels are stamped from a wear-resistant rubber mat, which makes the perforation spherical. A mesh in the mat reinforces the screen panels. The stamped mat is, if necessary, reinforced with ties.

Technology

GIGANT

Vulcanised rubber with a hardness of approx. 60 Shore A. Very resistant to abrasion and elastic.

KÜPRENE

Vulcanised rubber with a hardness of approx. 35 Shore A. Extremely flexible and wear-resistant.

CLEAN

Vulcanised rubber with a hardness of approx. 35 Shore A. Extremely flexible and wear-resistant.

GK-SOFT

Polyurethane in various degrees of hardness up to 85 Shore A. Wear-resistant and elastic.

Screen panels designed to precisely meet demands.

Conical perforation, therefore fewer blockages

Side- and end-tensioned designs

Manufactured according to customer requirements, special designs possible

Unlimited selection of perforation types

Available in all KÜPER materials

Suitable for original equipment and retrofits